Journal publications

Publications before joining NUS


20. On the heat-treatment induced evolution of residual stress and remarkable enhancement of adhesion strength of cold sprayed Ti–6Al–4V coatings

A Bhowmik*, AW Tan, W Sun, W Zhai, I Marinescu, E Liu

Results in Materials 7, 100119

19. Effect of substrate surface roughness on microstructure and mechanical properties of cold-sprayed Ti6Al4V coatings on Ti6Al4V Substrates

AW Tan*, W Sun, A Bhowmik, JY Lek, X Song, W Zhai, H Zheng, F Li, I Marinescu, Z Dong , E Liu*

Journal of Thermal Spray Technology 28 (8), 1959-1973

18. Composite NASICON (Na3Zr2Si2PO12) solid-state electrolyte with enhanced Na+ ionic conductivity: effect of liquid phase sintering

JA Oh, L He, A Plewa, M Morita, Y Zhao, T Sakamoto, X Song, W Zhai, K Zeng, L Lu*

ACS Applied Materials & Interfaces 11 (43), 40125-40133

17. Development of micro selective laser melting: the state of the art and future perspectives

B Nagarajan, Z Hu, X Song, W Zhai, J Wei*

Engineering 5 (4), 702-720

16. Formation of SS316L single tracks in micro selective laser melting: surface, geometry, and defects

Z Hu, B Nagarajan, X Song, R Huang, W Zhai, J Wei*

Advances in Materials Science and Engineering 2019

15. Numerical and experimental investigation on the deformation mechanism of micro single point incremental forming process

X Song*, J Zhang, W Zhai, M Taureza, S Castagne, A Danno

Journal of Manufacturing Processes 36, 248-254

14. Understanding the microstructural evolution of cold sprayed Ti-6Al-4V coatings on Ti-6Al-4V substrates

JY Lek*, A Bhowmik, AW Tan, W Sun, X Song, W Zhai, PJ Buenconsejo, F Li, E Liu, YM Lam, CB Boothroyd

Applied surface science 459, 492-504

13. Residual stresses in single particle splat of metal cold spray process–Numerical simulation and direct measurement

X Song*, J Everaerts, W Zhai, H Zheng, AW Tan, W Sun, F Li, I Marinescu, E Liu, AM Korsunsky

Materials Letters 230, 152-156

12. Influence of particle velocity when propelled using N2 or N2-He mixed gas on the properties of cold-sprayed Ti6Al4V coatings

AW Tan, JY Lek, W Sun, A Bhowmik, I Marinescu, X Song, W Zhai, F Li, Z Dong, CB Boothroyd, E Liu*

Coatings 8 (9), 327

11. Deposition characteristics of cold sprayed Inconel 718 particles on Inconel 718 substrates with different surface conditions

W Sun, AW Tan, A Bhowmik, I Marinescu, X Song, W Zhai, F Li, E Liu*

Materials Science and Engineering: A 720, 75-84

10. Microstructure-based experimental and numerical investigations on the sound absorption property of open-cell metallic foams manufactured by a template replication technique

W Zhai, X Yu, X Song*, LY Ang, F Cui, HP Lee, T Li

Materials & Design 137, 108-116

9. Ti reactive sintering of electrically conductive Al2O3–TiN composite: Influence of Ti particle size and morphology on electrical and mechanical properties

W Zhai, X Song*, T Li, B Yu, W Lu, K Zeng

Materials. 2017 Dec; 10(12):1348

8. Deformation-based micro surface texturing using soft backing self-alignment for polymeric material

JA Oh, A Danno, W Zhai, X Song*

Microsystem Technologies 23 (12), 5709-5715

7. Buffer pellets for high-yield, top-seeded melt growth of large grain Y–Ba–Cu–O superconductors

KN Devendra*, Y Shi, W Zhai, AR Dennis, JH Durrell, DA Cardwell

Crystal Growth & Design 15 (3), 1472-1480

6. Processing and properties of bulk Y–Ba–Cu–O superconductors fabricated by top seeded melt growth from precursor pellets containing a graded CeO2 composition

W Zhai*, Y Shi, JH Durrell, AR Dennis, A Zhang, DA Cardwell

Crystal Growth & Design 15 (2), 907-914

5. Numerical simulation and analysis of single grain YBCO processed from graded precursor powders

J Zou*, MD Ainslie, D Hu, W Zhai, ND Kumar, JH Durrell, YH Shi, DA Cardwell

Superconductor Science and Technology 28 (3), 035016

4. The influence of Y-211 content on the growth rate and Y-211 distribution in Y–Ba–Cu–O single grains fabricated by top seeded melt growth

W Zhai*, Y Shi, JH Durrell, AR Dennis, DA Cardwell

Crystal growth & design 14 (12), 6367-6375

3. The processing and properties of single grain Y–Ba–Cu–O fabricated from graded precursor powders

W Zhai*, YH Shi YH, JH Durrell, AR Dennis, NA Rutter, SC Troughton, SC Speller, DA Cardwell

Superconductor Science and Technology 26 (12), 125021

2. A Comparison of 0°–0° and 45°–45° bridge‐Seeded, YBCO single grains

Y Shi*, JH Durrell, AR Dennis, Z Zhang, W Zhai, NH Babu, DA Cardwell

Journal of the American Ceramic Society 96 (6), 1757-1762

1. A rapid process of YBa2Cu3O7− δ thin film fabrication using trifluoroacetate metal–organic deposition with polyethylene glycol additive

W Wu, F Feng*, K Shi, W Zhai, T Qu, R Huang, X Tang, X Wang, Q Hu, JC Grivel, Z Han

Superconductor Science and Technology 26 (5), 055013

Skip to toolbar