Research International Journal Publications

Professor Soh Khim Ong’s International Journals Publications

Note: If you wish to have a copy of any of the publications listed below, please send an email to Professor SK Ong at mpeongsk(at)nus.edu.sg.

1.     Application of Fuzzy Set Theory to Set-up Planning
S. K. Ong and A. Y. C. Nee, 1994, Annals of the CIRP, Vol. 43, No. 1, 137-144. https://doi.org/10.1016/S0007-8506(07)62182-9

2.     An Object-Oriented Approach to Computer-Aided Design of Plastic Injection Mould
S. K. Ong, S. Prombanpong and K. S. Lee, 1995, The International Journal of Intelligent Manufacturing, Vol. 6, No. 1, 1-10. https://doi.org/10.1007/BF00123672

3.     A Hybrid Approach for Set-up Planning
Y. F. Zhang, A. Y. C. Nee and S. K. Ong, 1995, The International Journal of Advanced Manufacturing Technology, Vol. 10, 183-190. https://doi.org/10.1007/BF01179346

4.     Process Modelling and Formulation for the Development of an Intelligent Set-up Planning System
S. K. Ong and A. Y. C. Nee, 1995, Proceedings of the Institute of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Vol. 209, 455-467. https://doi.org/10.1243%2FPIME_PROC_1995_209_109_02

5.     Fuzzy Set Based Approach for Concurrent Constraint Set-up Planning
S. K. Ong and A. Y. C. Nee, 1996, The International Journal of Intelligent Manufacturing, Special Issue on AI Applications in DFM and CE, Vol. 7, 107-120. https://doi.org/10.1007/BF00177067

6.     An Intelligent Fuzzy Set-up Planner for Manufacturability and Fixturability Evaluations
S. K. Ong and A. Y. C. Nee, 1996, The International Journal of Production Research, Vol. 34, No. 3, 665-686. https://doi.org/10.1080/00207549608904927

7.     Automating Set-up Planning in Machining Operations
S. K. Ong and A. Y. C. Nee, 1996, Journal of Materials Processing Technology, Vol 63, No. 1-3, 151-156. https://doi.org/10.1016/S0924-0136(96)02616-7

8.     Fuzzy Set Theory Applied to Set-up Sequencing for Sheet Metal Bending (Link)
S. K. Ong, L. J. De Vin, A. Y. C. Nee and H. J. J. Kals, 1997, International Journal of Materials Processing Technology, Vol. 69, No. 1-3, 29-36. https://doi.org/10.1016/S0924-0136(96)00035-0

9.     A Systematic Approach for Analysing the Fixturability of Parts for Machining
S. K. Ong and A. Y. C. Nee, 1998, Journal of Manufacturing Science and Engineering, Vol. 120. No. 2, 401-408. https://doi.org/10.1115/1.2830140

10.  Manufacturability Evaluation and Generation of Re-Design Suggestions for Machined Parts
S. K. Ong and A. Y. C. Nee, 1998, The International Journal of Manufacturing Science & Production, Vol. 1, No. 2, 87-105 (Online ISSN: 2191-0375). https://doi.org/10.1515/IJMSP.1998.1.2.87

11.  Development of a Semi-Quantitative Pre-LCA Tool
S. K. Ong, T. H. Koh and A. Y. C. Nee, 1999, The International Journal of Materials Processing Technology, Vol. 89-90, 574 — 582. https://doi.org/10.1016/S0924-0136(99)00059-X

12.  A Streamlined Life-Cycle Assessment Tool for the Production of Printers
S. K. Ong and A. Y. C. Nee, 1999, The International Journal of Manufacturing Science & Technology, Vol. 1, No. 1, 25 — 37.

13.  Evaluating the Manufacturability of Machined Parts and their Setup Plans
S. K. Ong and L. C. Chew, 1999, The International Journal of Production Research, Vol. 38, No. 11, 2397 — 2415. https://doi.org/10.1080/00207540050031832

14.  Philosophies for Integrated Product Development
A. Y. C. Nee and S. K. Ong, 2001, International Journal of Technology Management, Vol. 21, No. 3/4, 221 — 239. https://doi.org/10.1504/IJTM.2001.002909

15.  Recognition of Overlapping Machining Features Based on Hybrid Artificial Intelligence Techniques
W. D. Li, S. K. Ong and A. Y. C. Nee, 2001, Journal of Engineering Manufacture, Proceedings of the Institution of Mechanical Engineers Part B, Short Communications in Manufacture & Design, Vol. 214, 739 — 744. https://doi.org/10.1243%2F0954405001518107

16.  A VRML-Java-Based Approach to Teaching APT Programming
S. K. Ong and M. A. Mannan, 2001, International Journal of Mechanical Engineering Education, Vol. 29, No. 4, 345 — 359. https://doi.org/10.7227%2FIJMEE.29.4.5

17.  Multi-user NC Machining Simulation over WWW
Z. M. Qiu, Y. P. Chen, Z. D. Zhou, S. K. Ong, A. Y. C. Nee, 2001, International Journal of Advanced Manufacturing Technologies, Vol. 18, No. 1, 1 — 6. https://doi.org/10.1007/PL00003949

18.  STEP-Based Integration of Design-by-Feature and Feature Recognition for Manufacturing Applications in a Concurrent Engineering Environment
S. K. Ong, W. D. Li and A. Y. C. Nee, 2002, International Journal of Computer Applications in Technology, Special Issue on Applications in Industry of Product and Process Modelling Using Standards, Vol. 18, No. 1, 78 — 92. https://doi.org/10.1504/IJCAT.2003.002129

19.  Environmental Life Cycle Cost Analysis of Products
D. Senthil Kumaran, S. K. Ong, R. B. H. Tan and A. Y. C. Nee, 2001, Environmental Management and Health, Vol. 12, No. 3, 260 — 276. https://doi.org/10.1108/09566160110392335

20.  Assessing the Environmental Impact of Materials Processing Techniques Using an Analytical Hierarchy Process Method
S.K. Ong, T.H. Koh and A.Y.C. Nee, 2001, International Journal of Materials Processing Technology, Vol. 113, No. 1-3, 424 — 431. https://doi.org/10.1016/S0924-0136(01)00618-5

21.  Web-based Fault Diagnosis and Learning System
S.K. Ong, N. An and A.Y.C. Nee, 2001, International Journal of Advanced Manufacturing Technology, Vol. 18, No. 7, 505 — 511. https://doi.org/10.1007/s0017010180502

22.  A Tool for Quick Assessment of Environmental Impact and Implications of Manufacturing Processes and Products
S.K. Ong, 2001, International Journal for Manufacturing Science & Production, Vol. 4, No. 1, 51 — 69. https://doi.org/10.1515/IJMSP.2001.4.1.51

23.  Application of Genetic Algorithms in Cost Estimation of Gearing Products
S.K. Ong, Y.F. Jiang and A.Y.C. Nee, 2001, International Journal for Manufacturing Science & Production, Vol. 4, No. 1, 1 — 16. https://doi.org/10.1515/IJMSP.2001.4.1.1

24.  Alternative Manufacturing Feature Interpretations from a Design-by-Feature Model
W.D. Li, S.K. Ong and A.Y.C. Nee, 2002, Computer-Aided Design, Vol. 34, No. 11, 849 — 868. https://doi.org/10.1016/S0010-4485(01)00156-7

25.  Internet-based Virtual CNC Milling System
S.K. Ong, L. Jiang and A.Y.C. Nee, 2002, International Journal of Advanced Manufacturing Technology, Vol. 20, No. 1, 20 — 30. https://doi.org/10.1007/s001700200119

26.  Hybrid Genetic Algorithm and Simulated Annealing Approach for the Optimisation of Process Plans for Prismatic Parts
W.D. Li, S.K. Ong and A.Y.C. Nee, 2002, International Journal of Production Research, Vol. 40, No. 8, 1899 — 1922. Received the IJPR Norman Dudley Award 2003. https://doi.org/10.1080/00207540110119991 

27.  Evaluation of Existing Life Cycle Cost Analysis Methodologies (Link)
D. Senthil Kumaran, S.K. Ong, R.B.H. Tan and A.Y.C. Nee, 2002, Corporate Environmental Strategy, Vol. 9, No. 1, 30 — 39. https://doi.org/10.1016/S1066-7938(01)00141-5

28.  A Proposed Tool to Integrate Environmental Economical Assessments of Products
D. Senthil Kumaran, S.K. Ong, A.Y.C. Nee and R.B.H. Tan, 2003, Environmental Impact Assessment Review, Vol. 23,  No. 1, 51 — 72. https://doi.org/10.1016/S0195-9255(02)00032-X

29.  An Internet-Enabled Image- and Model-Based Virtual Machining System (Link)
Y.B. Luo, S.K. Ong, D.F. Chen and A.Y.C. Nee, 2002, International Journal of Production Research, Vol. 40, No. 10, 2269 — 2288. https://doi.org/10.1080/00207540210125498

30.  Hybrid GA and SA Dynamic Set-up Planning Optimisation
S.K. Ong, J. Ding, and A.Y.C. Nee, 2002, International Journal of Production Research, Vol. 40, No. 18, 4697 — 4719. https://doi.org/10.1080/00207540210155864

31.  Development of an Interactive Multi-Media Teaching Package for a Course on Metal Working
S.K. Ong and M.A. Mannan, 2003, Journal of Computer Applications in Engineering Education, Vol. 10, No. 4, 215 — 228. https://doi.org/10.1002/cae.10021

32.  Fuzzy-Set-AHP-Based DFM Tool for Rotational Parts
S.K. Ong, M.J. Sun and A.Y.C. Nee, 2003, International Journal of Materials Processing Technology, Vol. 138, No. 1-3, 223 — 230. https://doi.org/10.1016/S0924-0136(03)00076-1

33.  Geometric Simulation of NC Machining Based on STL Models
Z.D. Zhou, J.D. Zhou, Y.P. Chen, S.K. Ong and A.Y.C. Nee, 2003, Annals of the CIRP, Vol. 52, No. 1, 129 — 134. https://doi.org/10.1016/S0007-8506(07)60548-4

34.  A Hybrid Method for Recognizing Interacting Machining Features
W.D. Li, S.K. Ong and A.Y.C. Nee, 2003, International Journal of Production Research, Vol. 41, No. 9, 1887 — 1908. https://doi.org/10.1080/0020754031000123868

35.  Managing Modular Fixture Elements with Tabu Search in a Web-based Environment
T. Girish, S.K. Ong and A.Y.C. Nee, 2003, International Journal of Production Research, Vol. 41, No. 8, 1665 — 1687. https://doi.org/10.1080/1352816031000075008

36.  A Methodology to Identify the Design and Manufacturing Features from a Data Exchanged Part Model
M.W. Fu, A.Y.C. Nee, W.F. Lu, S.K. Ong and I. Lee, 2003, Computer-Aided Design, Vol. 35, No. 11, 979 — 993. https://doi.org/10.1016/S0010-4485(02)00160-4

37.  A Distributed Feature-based Environment for Collaborative Design
W.D. Li, Y.Q. Lu, H. Zhou, S.K. Ong, A.Y.C. Nee, J.Y.H. Fuh and Y.S. Wong, 2003, Journal of Systematics, Cybernetics and Informatics, Vol. 1, No. 1, 1 — 6. (Download link)

38.  A Framework for an Integrated Collaborative Manufacturing System for the Tooling Industry
X.G. Ming, S.K. Ong, W.F. Lu and A.Y.C. Nee, 2003, International Journal of Agile Manufacturing, Vol. 7, No. 1, 9 — 21.

39.  A Multi-Agent-Based Agile Scheduling Model for a Virtual Manufacturing Environment
Z.D. Zhou, H.H. Wang, Y.P. Chen, S.K. Ong, J.Y.H. Fuh and A.Y.C. Nee, 2003, International Journal of Advanced Manufacturing Technology, Vol. 21, No. 12, 980 — 984. https://doi.org/10.1007/s00170-002-1420-1

40.  Application of Mobile Agents in a Web-based Real-time Monitoring System
S.K. Ong and W.W. Sun, 2003, International Journal of Advanced Manufacturing Technology, Vol. 22, No. 1-2, 33 — 40. https://doi.org/10.1007/s00170-002-1440-x

41.  An Adaptive Upgradable Agent-Based System for Collaborative Product Design and Manufacture
H.Z. Jia, S.K. Ong, J.Y.H. Fuh, Y.F. Zhang and A.Y.C. Nee, 2004, Robotics and Computer-Integrated Manufacturing, Vol. 20, No. 2, 79 — 90. https://doi.org/10.1016/j.rcim.2003.08.001

42.  Feature-based Design in a Distributed and Collaborative Environment (Download Link)
W.D. Li, S.K. Ong, J.Y.H. Fuh, Y.S. Wong, Y.Q. Lu and A.Y.C. Nee, 2004, Computer-Aided Design, Vol. 36, No. 9, 775 — 798. https://doi.org/10.1016/j.cad.2003.09.005

43.  Virtual Reality Simulations and Animations in a Web-based Interactive Manufacturing Engineering Module
S.K. Ong and M.A. Mannan, 2004, Computers & Education, Vol. 43, No. 4, 361 — 382. https://doi.org/10.1016/j.compedu.2003.12.001

44.  The Virtual Interaction Panel: An Easy Control Tool in Augmented Reality Systems
M.L. Yuan, S.K. Ong and A.Y.C. Nee, 2004, Computer Animation and Virtual Worlds Journal, Special Issue: The Very Best Papers from CASA 2004, Vol. 15, No. 3-4, 425 — 432. https://doi.org/10.1002/cav.46

45.  Online Design Reuse Tool for the Support of the Generation, Embodiment and Detailed Design of Products
S.K. Ong and D.O. Guo, 2004, International Journal of Production Research, Vol. 42, No. 16, 3301 — 3331. https://doi.org/10.1080/00207540410001671615

46.  Optimization of Process Plans Using a Constraint-based Tabu Search Approach
W.D. Li, S.K. Ong and A.Y.C. Nee, 2004, International Journal of Production Research, Vol. 42, No. 10, 1955 — 1985. https://doi.org/10.1080/00207540310001652897

47.  A Methodology for Evaluating the Manufacturing Ability of Equipment in Virtual Enterprises
H.H. Wang, Z.D. Zhou, Y.P. Chen, S.K. Ong and A.Y.C. Nee, 2006, International Journal of Computer Integrated Manufacturing, Vol. 19, No. 4, 339 — 349. https://doi.org/10.1080/09511920500064714

48.  A Web-based Process Planning Optimization System for Distributed Design
W.D. Li, S.K. Ong and A.Y.C. Nee, 2005, Computer-Aided Design, Vol. 36, No. 9, 775 — 797. https://doi.org/10.1016/j.cad.2004.09.019

49.  An Online Web-based Environment for Detailed Design Reuse
S.K. Ong and D.O. Guo, 2005, International Journal of Advanced Manufacturing Technology, Vol. 27, No. 5-6, 462 — 467. https://doi.org/10.1007/s00170-004-2211-7

50.  Registration based on Projective Reconstruction for Augmented Reality Systems
M.L. Yuan, S.K. Ong and A.Y.C. Nee, 2005, IEEE Transactions on Visualization and Computer Graphics, Vol. 11, No. 3, 254 — 264. https://doi.org/10.1109/TVCG.2005.48

51.  A Web-based Configuration Design System for Product Customization
S.K. Ong, Q. Lin and A.Y.C. Nee, 2005, International Journal of Production Research, Vol. 44, No. 2, 351 — 382. https://doi.org/10.1080/00207540500244153

52.  A Generalised Registration Method for Augmented Reality Systems
M.L. Yuan, S.K. Ong and A.Y.C. Nee, 2005, Computer and Graphics, Vol. 29, No. 6, 980 — 997. https://doi.org/10.1016/j.cag.2005.09.014

53.  Real-time, Dynamic Level-of-Detail Management for Three-Axis NC Milling Simulation
S.Q. Liu, S.K. Ong, Y.P. Chen and A.Y.C. Nee, 2005, Computer-Aided Design, Vol. 38, No. 4, 378 — 391. https://doi.org/10.1016/j.cad.2005.11.003

54.  Registration Using Natural Features for Augmented Reality Systems

M.L. Yuan, S.K. Ong and A.Y.C. Nee, 2006, IEEE Transactions on Visualization and Computer Graphics, Vol. 12, No. 4, 569 — 580. https://doi.org/10.1109/TVCG.2006.79

55.  Function-Based Design Synthesis Approach to Design Reuse
Q.L. Xu, S.K. Ong and A.Y.C. Nee, 2006, Research in Engineering Design, Vol. 17, No. 1, 27 — 44. https://doi.org/10.1007/s00163-006-0015-5

56.  Assembly Feature Design in an Augmented Reality Environment
Y. Pang, A.Y.C. Nee, S.K. Ong, M.L. Yuan and K. Youcef-Toumi, 2006, Assembly Automation, Vol. 26, No. 1, 34 — 43. https://doi.org/10.1108/01445150610645648

57.  Design and Development of 3-DOF Modular Micro Parallel Kinematic Manipulator
C.C. Ng, S.K. Ong and A.Y.C. Nee, 2006, International Journal of Advanced Manufacturing Technologies, Vol. 31, No. 1-2, 188 — 200. https://doi.org/10.1007/s00170-005-0166-y

58.  A Web-based Multi-Agent System for Distributed Digital Manufacturing
M. Mahesh, S.K. Ong and A.Y.C. Nee, 2006, International Journal of Computer-Integrated Manufacturing, Vol. 20, No. 1, 11 — 27. https://doi.org/10.1080/09511920600710927

59.  Design Reuse Methodology for Product Family Design
S.K. Ong, Q.L. Xu and A.Y.C. Nee, 2006, Annals of CIRP, Vol. 55, No. 1, 161 — 164. https://doi.org/10.1016/S0007-8506(07)60389-8

60.  Development of a Web-based Graduate-level Module Courseware
S.K. Ong, 2006, Computer Applications in Engineering Education, Vol. 14, No. 2, 90 — 105. https://doi.org/10.1002/cae.20069

61.  Towards a Generic Distributed and Collaborative Digital Manufacturing
M. Mahesh, S.K. Ong, A.Y.C. Nee, J.Y.H. Fuh and Y.F. Zhang, 2005, Robotics and Computer-Integrated Manufacturing, Vol. 23, No. 3, 267 — 275 . https://doi.org/10.1016/j.rcim.2006.02.008

62.  Communication and Coordination in Multi-Agent Manufacturing System
M. Mahesh, S.K. Ong and A.Y.C. Nee, 2006, International Journal of Manufacturing Research, Vol. 1, No. 1, 59 — 82. https://dx.doi.org/10.1504/IJMR.2006.010704

63.  Augmented Reality for Assembly Guidance Using a Virtual Interactive Tool
M.L. Yuan, S.K. Ong and A.Y.C. Nee, 2006, International Journal of Production Research, Vol. 46, No. 7, 1745 — 1767.  https://doi.org/10.1080/00207540600972935

64.  Augmented Reality Applications in Manufacturing: A Survey
S.K. Ong, M.L. Yuan and A.Y.C. Nee, 2006, International Journal of Production Research, Vol. 46, No. 10, 2707 — 2742. https://doi.org/10.1080/00207540601064773

65.  Reflectance Modeling for a Textured Object under Uncontrolled Illumination from High Dynamic Range Maps
G.H. Hu, S.K. Ong, Y.P. Chen and A.Y.C. Nee, 2006, Computers & Graphics Journal, Vol. 33, No. 2, 262 — 270. https://doi.org/10.1016/j.cag.2007.01.002

66.  Augmented Reality Aided Assembly Design and Planning
S.K. Ong, Y. Pang and A.Y.C. Nee, 2007, Annals of the CIRP, Vol. 56, No. 1, 49 — 52. https://doi.org/10.1016/j.cirp.2007.05.014

67.  Methodologies For Immersive Robot Programming In An Augmented Reality Environment (Link)
J.W.S. Chong, S.K. Ong and A.Y.C. Nee, 2007, International Journal of Virtual Reality, Vol. 6, No. 1, 69 — 79. https://doi.org/10.1145/1174429.1174470

68.  Evaluation of Product Performance in Product Family Design Reuse

Q.L. Xu, S.K. Ong and A.Y.C. Nee, 2007, International Journal for Production Research, Special Issue on Sustainable Production, Vol. 45, No. 18, 4119 — 4141. https://doi.org/10.1080/00207540701440147

69.  Methods for in-field user calibration of inertial measurement unit without external equipment (Link)
W.T. Fong, S.K. Ong and A.Y.C. Nee, June 2008, Measurement Science and Technology Journal, Vol. 19, No. 8, 085202. https://doi.org/10.1088/0957-0233/19/8/085202

70.  Product Information Visualization and Augmentation in Collaborative Design
Y. Shen, S.K. Ong and A.Y.C. Nee, 2008, Computer-Aided Design, Vol. 40, No. 9, 963-974. https://doi.org/10.1016/j.cad.2008.07.003

71.  Robot Programming using Augmented Reality: an Interactive Method for Planning Collision-Free Paths
J.W.S. Chong, S.K. Ong, A.Y.C. Nee and K. Youcef-Toumi, 2008, Robotics and Computer-Integrated Manufacturing, Vol. 25, No. 3, 689-701. https://doi.org/10.1016/j.rcim.2008.05.002

72.  Mixed Reality Environment for Collaborative Product Design and Development
Y. Shen and S.K. Ong, 2009, Annals of CIRP, Vol. 58, No. 1, 139-142. https://doi.org/10.1016/j.cirp.2009.03.020

73.  The Effectiveness of Detector Combinations (Open Access, Download Link)
Z.H. Li, W.G. Gong, A.Y.C. Nee, S.K. Ong and W.H. Li, 2009, Optics Express, Vol. 17, No. 9, 7407-7418. https://www.osapublishing.org/oe/fulltext.cfm?uri=oe-17-9-7407&id=179238

74.  Image Authenticity Verification based on Matching Technology
Z.H. Li, W.G. Gong, A.Y.C. Nee and S.K. Ong, 2009, Chinese Journal of Scientific Instrument (Chinese), Vol. 30, No. 9, 876-881.

75.  Development and Trajectory Planning of a Hybrid Serial-Parallel Manipulator
V. B. Saputra, C.C. Ng, S.K. Ong and A.Y.C. Nee, 2009, Asian International Journal of Science and Technology in Production and Manufacturing Engineering, Vol. 2, No. 1, 99 – 115.

76.  Region restricted rapid keypoint registration (Open Access, Download Link)
Z.H. Li, W.G. Gong, A.Y.C. Nee and S.K. Ong, 2009, Optics Express, Vol. 17, No. 24, 22096-22101. https://www.osapublishing.org/oe/fulltext.cfm?uri=oe-17-24-22096&id=190514

77.  A Novel AR-Based Robot Programming And Path Planning Methodology
J.W.S. Chong, S.K. Ong and A.Y.C. Nee, 2010, Robotics and Computer-Integrated Manufacturing, Vol. 26, No. 3, 240-249. https://doi.org/10.1016/j.rcim.2009.11.003

78.  Development of an AR system achieving in situ machining simulation on a 3-axis CNC machine
J. Zhang, S.K. Ong and A.Y.C. Nee, 2010, Computer Animation and Virtual World, Vol. 21, No. 2, 103-115. https://doi.org/10.1002/cav.327

79.  Agent-based Distributed Scheduling for Virtual Job Shops
P. Lou, S.K. Ong and A.Y.C. Nee, 2010, International Journal of Production Research, Vol. 48, No. 13, 3889 – 3910. https://doi.org/10.1080/00207540902927918

80.  Augmented Reality for Collaborative Product Design and Development
Y. Shen, S.K. Ong and A.Y.C. Nee, 2010, Design Studies, Vol. 31, No. 2, 118-145. https://doi.org/10.1016/j.destud.2009.11.001

81.  Haptic-based Interactive Path Planning for a Virtual Robot Arm
C.J. Chen, S.K. Ong, A.Y.C. Nee and Y.Q. Zhou, Mar 2010, International Journal of Interactive Design and Manufacturing (Springer), Vol. 4, No. 2, 113-123. https://doi.org/10.1007/s12008-010-0088-2

82.  Coordination for replicated collaborative feature modeling
L. Yang, S.K. Ong and A.Y.C. Nee, August 2010, International Journal of Interactive Design and Manufacturing (Springer), Vol. 4, No. 3, 191-200. https://doi.org/10.1007/s12008-010-0101-9

83.  A Surface Blending Approach for Displacement Features in Freeform Surfaces
L. Yang, S.K. Ong and A.Y.C. Nee, Jan 2011, Computer-Aided Design, Vol. 43, No. 1, 57-66. https://doi.org/10.1016/j.cad.2010.09.006

84.  A Multi-Regional Computation Scheme in an AR-Assisted in situ CNC Simulation Environment
J. Zhang, S.K. Ong and A.Y.C. Nee, 2010, Computer-Aided Design, Vol. 42, No. 12, 1167-1177. https://doi.org/10.1016/j.cad.2010.06.007

85.  Development of a Shoe-mounted Assistive User Interface for Navigation
J. Zhang, C.W. Lip, S.K. Ong and A.Y.C. Nee, 2010, International Journal of Sensor Networks, Vol. 9, No. 1, 3-12. https://dx.doi.org/10.1504/IJSNET.2011.037300

86.  Multi-Agent Based Pay-Per-Use (PpU) Distributed Manufacturing
S.K. Ong, P. Lou and A.Y.C. Nee, 2011, International Journal on Computer Applications in Technology, Vol. 40, No. 1-2, 114-121. https://dx.doi.org/10.1504/IJCAT.2011.038558

87.  Vision-based Hand Interaction in Augmented Reality Environment
Y. Shen, S.K. Ong and A.Y.C. Nee, 2011, International Journal of Human-Computer Interaction, Vol. 27, No. 6, 523-544. https://doi.org/10.1080/10447318.2011.555297

88.  RFID-Assisted Assembly Guidance System in an Augmented Reality Environment
J. Zhang, S.K. Ong and A.Y.C. Nee, 2011, International Journal of Production Research, Vol. 49, No. 13, 3919-3938. https://doi.org/10.1080/00207543.2010.492802

89. GRAONTO: A Graph-based Approach for Automatic Construction of Domain Ontology

X. Hou, S.K. Ong, X.T. Zhang and W.J. Liu, May 2011, Expert System with Applications, Vol. 38, No. 9, 11958-11975. https://doi.org/10.1016/j.eswa.2011.03.090

90.  GARDE: A Gesture-based Augmented Reality Design Evaluation System

L.X. Ng, S.W. Oon, S.K. Ong, A.Y.C. Nee, Jun 2011, International Journal of Interactive Design and Manufacturing (Springer), Vol. 5, No. 2, 85-94. https://doi.org/10.1007/s12008-011-0117-9

91.  Augmented Assembly Technologies Based on 3D Bare-hand Interaction

S.K. Ong and Z.B. Wang, 2011, Annals of CIRP, Vol. 60, No. 1, 1-4. https://doi.org/10.1016/j.cirp.2011.03.001

92.  An enhanced ant colony optimizer for multi-attribute partner selection in virtual enterprises

S.H. Niu, S.K. Ong and A.Y.C. Nee, Apr 2012, International Journal of Production Research, Vol. 50, No. 8, 2286-2303. https://doi.org/10.1080/00207543.2011.578158

93.  A New History-Independent Modeling Approach for Feature-based Design

L. Yang, S.K. Ong and A.Y.C. Nee, Mar 2012, International Journal of Advanced Manufacturing Technology, Vol. 59, No. 9, 841-858. https://doi.org/10.1007/s00170-011-3559-0

94.  Interactive Robot Trajectory Planning and Simulation using Augmented Reality

H.C. Fang, S.K. Ong and A.Y.C. Nee, Oct 2011, Robotics and Computer-Integrated Manufacturing, Vol. 28, No. 2, 227-237. https://doi.org/10.1016/j.rcim.2011.09.003

95.  A Novel approach in rehabilitation of hand-eye coordination and finger dexterity

Y. Shen, P.W. Gu, S.K. Ong and A.Y.C. Nee, May 2012, Virtual Reality, Vol. 16, 161-171. https://doi.org/10.1007/s10055-011-0194-x

96.  Augmented reality applications in design and manufacturing

A.Y.C. Nee, S.K. Ong, G. Chryssolouris, and D. Mourtzis, 2012, Annals of CIRP, Vol. 61, No. 2. https://doi.org/10.1016/j.cirp.2012.05.010

97. An Improved Intelligent Water Drops Algorithm for Achieving Optimal Job Shop Scheduling Solutions

S.H. Niu, S.K. Ong and A.Y.C. Nee, Feb 2011, International Journal of Production Research, Vol. 50, No. 15, 4192-4205. https://doi.org/10.1080/00207543.2011.600346

98.   An Authorable Context-aware Augmented Reality System to Assist the Maintenance Technicians

J. Zhu, S.K. Ong and A.Y.C. Nee, Aug 2012, International Journal of Advanced Manufacturing Technology, Vol. 66, No. 9, 1699-1714. https://doi.org/10.1007/s00170-012-4451-2

99.   Design and development of an in situ machining simulation system using augmented reality technology (Open Access, Download Link)

J. Zhang, S.K. Ong and A.Y.C. Nee, 2012, Procedia CIRP, Vol. 3, No. 1, 185-190. https://doi.org/10.1016/j.procir.2012.07.033

100.   Robot path and end-effector orientation planning using augmented reality (open Access, Download Link)

H.C. Fang, S.K. Ong and A.Y.C. Nee, 2012, Procedia CIRP, Vol. 3, No. 1, 191-196. https://doi.org/10.1016/j.procir.2012.07.034

101.   A novel maintenance system for equipment serviceability improvement

J. Zhu and S.K. Ong, 2013, Annals of CIRP, Vol. 62, No. 1, 39-42. https://doi.org/10.1016/j.cirp.2013.03.091

102.   Orientation Planning Robot End-effector using Augmented Reality

H.C. Fang, S.K. Ong and A.Y.C. Nee, July 2013, International Journal of Advanced Manufacturing Technology, Vol. 67, No. 9, 2033-2049. https://doi.org/10.1007/s00170-012-4629-7

103.   Integrated Product Design and Assembly Planning in an Augmented Reality Environment

L.X. Ng, Z.B. Wang, S.K. Ong and A.Y.C. Nee, September 2013, Assembly Automation, Vol. 33, No. 4, 345-359. https://doi.org/10.1108/AA-10-2012-058

104.   Assistive Obstacle Detection and Navigation Devices for Vision-Impaired Users

S.K. Ong, J. Zhang and A.Y.C. Nee, September 2013, Disability and Rehabilitation: Assistive Technology, Vol. 8, No. 5, 409-416. https://doi.org/10.3109/17483107.2012.756946

105.   CAD model based virtual assembly simulation, planning and training

M.C. Leu, H.A. ElMaraghy, A.Y.C. Nee, S.K. Ong, M. Lanzetta, M. Putz, W. Zhu, A. Bernard, August 2013, Annals of CIRP, Vol. 62, No. 2, 799-822. https://doi.org/10.1016/j.cirp.2013.05.005

106.   An improved Intelligent Water Drops algorithm for solving multi-objective job shop scheduling (Link)

S.H. Niu, S.K. Ong and A.Y.C. Nee, November 2013, Engineering Applications of Artificial Intelligence, Vol. 26, No. 10, 2431 – 2442. https://doi.org/10.1016/j.engappai.2013.07.011

107.   Augmented Reality Aided Interactive Manual Assembly Design

Z.B. Wang, S.K. Ong and A.Y.C. Nee, November 2013, International Journal of Advanced Manufacturing Technology, Vol. 69, No. 5, 1311- 1321. https://doi.org/10.1007/s00170-013-5091-x

108.   Assembly Planning and Evaluation in an Augmented Reality Environment

Z.B. Wang, L.X., Ng, S.K. Ong and A.Y.C. Nee, December 2013, International Journal of Production Research, Vol. 51, No. 23-24, 7388 – 7404. https://doi.org/10.1080/00207543.2013.837986

109.   A Novel Augmented Reality-based Interface for Human-robot Interaction

H.C. Fang, S.K. Ong and A.Y.C. Nee, Jan 2014, International Journal of Interactive Design and Manufacturing, Vol. 8, No. 1, 33 – 42. https://doi.org/10.1007/s12008-013-0191-2

110.   A Swarm Optimization Approach for Solving Workspace Determination of Parallel Manipulators

V.B. Saputra, S.K. Ong and A.Y.C. Nee, July 2012, Robotica, Vol. 33, No. 3, 649-668. https://doi.org/10.1017/S0263574714000290

111.   A Context-aware Augmented Reality Assisted Maintenance System

J. Zhu, S.K. Ong and A.Y.C. Nee, February 2013, International Journal of Computer Integrated Manufacturing, Vol. 28, No. 2, pp 213-225. https://doi.org/10.1080/0951192X.2013.874589

112.   A Context-aware Augmented Reality System to Assist the Maintenance Operators

J. Zhu, S.K. Ong and A.Y.C. Nee, Apr 2013, International Journal of Interactive Design and Manufacturing, Vol. 8, No. 4, 293-304. https://doi.org/10.1007/s12008-013-0199-7

113.   Conceptual Design using Functional 3D Models in Augmented Reality

X. Ng, S.K. Ong and A.Y.C. Nee, 2015, International Journal of Interactive Design and Manufacturing, Vol. 9, No. 2, pp 115-133. https://doi.org/10.1007/s12008-014-0207-6

114.  Optimum calibration of a parallel kinematic manipulator using digital indicators

V.B. Saputra, S.K. Ong and A.Y.C. Nee, December 2013, Advances in Manufacturing, Vol. 2, No. 3, 222-230. https://doi.org/10.1007/s40436-013-0052-z

115.  A Novel Evaluation Index for Adolescent Idiopathic Scoliosis Progression Measurement and Diagnosis (Link)

X. Zheng, Y.J. Tang, S.K. Ong, A.Y.C. Nee, 2014, Technology and Health Care, Vol. 22, No. 2, pp 225-241, DOI: 10.3233/THC-140779.

116.   An AR-based Hybrid Approach for Facility Layout Planning and Evaluation

S. Jiang, S.K. Ong and A.Y.C. Nee, Sept 2012, International Journal of Advanced Manufacturing Technology, Vol. 72, No. 1, 457-473. https://doi.org/10.1007/s00170-014-5653-6

117. A Novel AR-based Interface for Human-robot Interaction and Visualization

H.C. Fang, S.K. Ong and A.Y.C. Nee, Dec 2013, Advances in Manufacturing, Vol. 2, No. 4, 275-288. https://doi.org/10.1007/s40436-014-0087-9

118. End-of-Life strategy planning for components of returned products

S.S. Yang, S.K. Ong and A.Y.C. Nee, 2015, International Journal of Advanced Manufacturing Technology, Vol. 77, No. 5, 991-1003. https://doi.org/10.1007/s00170-014-6505-0

119. Product Remanufacturability Assessment Based on Design Information (Open Access, Download Link)

H.C. Fang, S.K. Ong and A.Y.C. Nee, June 2014, Procedia CIRP, Vol. 15, No. 1, 195-200. https://doi.org/10.1016/j.procir.2014.06.050

120. Design for Disassembly for Remanufacturing: Methodology and Technology (Open Access, Download Link)

S.L. Soh, S.K. Ong and A.Y.C. Nee, June 2014, Procedia CIRP, Vol. 15, No. 1, 407-412. https://doi.org/10.1016/j.procir.2014.06.053

121. Remanufacturing Process Planning (Open Access, Download Link)

S. Tsang Mang Kin, S.K. Ong and A.Y.C. Nee, June 2014, Procedia CIRP, Vol. 15, No. 1, 189-194. https://doi.org/10.1016/j.procir.2014.06.087

122. Modular Design of Machine Tools to Facilitate Design for Disassembly and Remanufacturing (Open Access, Download Link)

P.J. Wang, Y.X. Liu, S.K. Ong and A.Y.C. Nee, June 2014, Procedia CIRP, Vol. 15, No. 1, 443-448. https://doi.org/10.1016/j.procir.2014.06.085

123. Implementation of DfRem into the product development process (Open Access, Download Link)

S.S. Yang, S.K. Ong and A.Y.C. Nee, 2014, Procedia CIRP, Vol. 26, No. 1, 565-570. https://doi.org/10.1016/j.procir.2014.07.026

124. Product remanufacturability assessment and implementation based on design features (Open Access, Download Link)

H.C. Fang, S.K. Ong and A.Y.C. Nee, 2014, Procedia CIRP, Vol. 26, No. 1, 571-576. https://doi.org/10.1016/j.procir.2014.07.027

125. Application of design for Disassembly from remanufacturing perspective (Open Access, Download Link)

S.L. Soh, S.K. Ong and A.Y.C. Nee, 2014, Procedia CIRP, Vol. 26, No. 1, 577-582. https://doi.org/10.1016/j.procir.2014.07.028

126. The Impact of Automotive Product Remanufacturing on Environmental Performance (open Access, Download Link)

S.S. Yang, S.K. Ong and A.Y.C. Nee, 2015, Procedia CIRP, Vol. 29, No. 1, 774-779. https://doi.org/10.1016/j.procir.2015.01.017

127. Real-time Finite Element Structural Analysis in Augmented Reality

J.M. Huang, S.K. Ong and A.Y.C. Nee, May 2015, Advances in Engineering Software, Vol 87, 43-56. https://doi.org/10.1016/j.advengsoft.2015.04.014

128. Stiffness analysis of parallelogram-type parallel manipulators using a strain energy method

S.J. Yan, S.K. Ong and A.Y.C. Nee, July 2015, Robotics and Computer Integrated Manufacturing, Vol 37, 13-22. (Link) https://doi.org/10.1016/j.rcim.2015.05.004

129. A simulation-based genetic algorithm approach for remanufacturing process planning and scheduling

R. Zhang, S.K. Ong and A.Y.C. Nee, Dec 2015, Applied Soft Computing, Vol. 37, 521-532. https://doi.org/10.1016/j.asoc.2015.08.051

130. Real-Virtual Interaction in AR Assembly Simulation based on Component Contact Handling Strategy

X. Wang, S.K. Ong and A.Y.C. Nee, Dec 2015, Assembly Automation, Vol. 35, No. 4, 376-394. https://doi.org/10.1108/AA-02-2015-012

131. Towards A Griddable Distributed Manufacturing System with Augmented Reality Interfaces

A.W.W. Yew, S.K. Ong and A.Y.C. Nee, January 2016, Robotics and Computer Integrated Manufacturing, Vol. 39, 43-55. (Link) https://doi.org/10.1016/j.rcim.2015.12.002

132. Automating design with intelligent human-machine integration

Y.H. Yin, A.Y.C Nee, S.K. Ong, J.Y. Zhu, P.H. Gu, and L.J. Chen, 2015, Annals of CIRP, Vol. 64, No. 2, 655-677 https://doi.org/10.1016/j.cirp.2015.05.008

133. Design for Assembly and Disassembly for Remanufacturing

S.L. Soh, S.K. Ong and A.Y.C. Nee, 2016, Assembly Automation, Vol. 36, No. 1, 12-24. https://doi.org/10.1108/AA-05-2015-040

134. A Tracking Solution for Mobile Augmented Reality based on Sensor-aided Marker-less Tracking and Panoramic Mapping

L. Yu, S.K. Ong and A.Y.C. Nee, March 2016, Multimedia Tools and Applications, Vol. 75, No. 6, 3199-3220. https://doi.org/10.1007/s11042-014-2430-3

135. Registration of a hybrid robot using the Degradation-Kronecker method and a purely nonlinear method

S.J. Yan, S.K. Ong and A.Y.C. Nee, July 2015, Robotica, Vol. 34, No. 12, 2729-2740. https://doi.org/10.1017/S0263574715000338

136. Designing automotive products for remanufacturing from material selection perspective

S.S. Yang, S.K. Ong and A.Y.C. Nee, September 2015, Journal of Cleaner Production, Vol. 153, 570-579. https://doi.org/10.1016/j.jclepro.2015.08.121

137. A Comprehensive Survey of Augmented Reality Assembly Research

X. Wang, S.K. Ong and A.Y.C. Nee, March 2016, Advances in Manufacturing, Vol. 4, No. 1, 1-22. https://doi.org/10.1007/s40436-015-0131-4

138. Real-virtual components interaction for assembly simulation and planning

X. Wang, S.K. Ong and A.Y.C. Nee, 2016, Robotics and Computer Integrated Manufacturing, Vol. 41, 102-114. (Link) https://doi.org/10.1016/j.rcim.2016.03.005

139. Optimization Design of General Triglide Parallel Manipulators

S.J. Yan, S.K. Ong and A.Y.C. Nee, Aug 2016, Advanced Robotics, Vol. 30, no. 16, 1027-1038. (Link) https://doi.org/10.1080/01691864.2016.1192063

140. Multi-modal augmented-reality assembly guidance based on bare-hand interface

X. Wang, S.K. Ong and A.Y.C. Nee, 2016, Advanced Engineering Informatics, Vol 30, No. 3, 406-421. (Link) https://doi.org/10.1016/j.aei.2016.05.004

141. An Augmented Reality-assisted Therapeutic Healthcare Exercise System Based on Bare-hand Interaction

M.Y. Zhao, S.K. Ong and A.Y.C. Nee, Sep 2016, International Journal of Human-Computer Interaction, Vol. 32, No. 9, 708-721. (Link) https://doi.org/10.1080/10447318.2016.1191263

142. Holistic Decision Support Tool for Remanufacturing: End-Of-Life (EOL) Strategy Planning

S.S. Yang, N Nasr, S.K. Ong and A.Y.C. Nee, 2016, Advances in Manufacturing, Vol. 4, No. 3, 189-201. https://doi.org/10.1007/s40436-016-0149-2

143. Visualization and Interaction of Finite Element Analysis in Augmented Reality

J.M. Huang, S.K. Ong and A.Y.C. Nee, March 2017, Computer-Aided Design, Vol. 84, 1-14. https://doi.org/10.1016/j.cad.2016.10.004

144. Robot path planning optimization for welding complex joints

H.C. Fang, S.K. Ong, A.Y.C. Nee, 2017, International Journal of Advanced Manufacturing Technology, Vol. 90, No. 9, 3829-3839. https://doi.org/10.1007/s00170-016-9684-z

145. Enhanced Planar Pattern Tracking for an Outdoor Augmented Reality System (Open Access, Download Link)

L. Yu, W.K. Li, S.K. Ong, A.Y.C. Nee, 2017, International Journal of Computer, Electrical, Automation, Control and Information Engineering, Vol. 11, No. 2, 85-96. https://doi.org/10.5281/zenodo.1339832

146. Adaptive pass planning and optimization for robotic welding of complex joints

H.C. Fang, S.K. Ong, A.Y.C. Nee, June 2017, Advances in Manufacturing, Vol. 5, No. 2, 93-104. https://doi.org/10.1007/s40436-017-0181-x

147. Structure design and analysis with integrated AR-FEA

S.K. Ong, J.M. Huang, 2017, Annals of CIRP, Vol. 66, No. 1, 149-152. https://doi.org/10.1016/j.cirp.2017.04.035

148. Optimal pass planning for robotic welding of large-dimension joints with non-uniform grooves

S.J. Yan, H.C. Fang, S.K. Ong, A.Y.C. Nee, 2018, Proceedings of IMechE Part B: Journal of Engineering Manufacture, Vol. 232, no. 13, 2386-2397. https://doi.org/10.1177%2F0954405417718877

149. Haptic and Visual Augmented Reality Interface for Programming Welding Robots

D.J. Ni, A.W.W. Yew, S.K. Ong, A.Y.C. Nee, September 2017, Advances in Manufacturing, Vol. 5, No. 3, 191-198. https://doi.org/10.1007/s40436-017-0184-7

150. Point Cloud Augmented Virtual Reality Environment with Haptic Constraints for Teleoperation 

D.J. Ni, A.Y.C. Nee, S.K. Ong, H.J. Li, C.C. Zhu, A.G. Song, 2018, Transactions of the Institute of Measurement and Control, Vol. 40, No. 15, 4091-4104. https://doi.org/10.1177%2F0142331217739953

151. A state-of-the-art review of augmented reality in engineering analysis and simulation (Open Access, Download Link)

W.K. Li, S.K. Ong, A.Y.C. Nee, September 2017, Multimodal Technologies and Interaction, Special Issue entitled “Recent Advances in Augmented Reality”, Vol. 1, No. 3, 17-39. https://doi.org/10.3390/mti1030017

152. Enhancing mechanisms education through interaction with augmented reality simulation

Y. Wang, S.K. Ong, A.Y.C. Nee, 2018, Computer Applications in Engineering Education, Special Issue entitled “25th Anniversary Special Issue of Computer Applications in Engineering Education Innovation in Engineering Education with Digital Technologies”, Vol. 26, No. 5, 1552-1564. https://doi.org/10.1002/cae.21951

153. Mobile Augmented Reality Visualization and Collaboration techniques for On-site Finite Element Structural Analysis (Link)

W.K. Li, A.Y.C. Nee, S.K. Ong, June 2018, International Journal of Modeling, Simulation, and Scientific Computing, Special Issue on “Virtual Reality and Visualization”, Vol. 9, No. 3, pp. 1840001. https://doi.org/10.1142/S1793962318400019

154. A comprehensive survey of ubiquitous manufacturing research

X. Wang, S.K. Ong and A.Y.C. Nee, Jan 2018, International Journal of Production Research, Vol. 56, No. 1-2, 604-628. https://doi.org/10.1080/00207543.2017.1413259

158. A Mobile Solution for Augmenting Manufacturing Environment with User-generated Annotations (Open Access, Download Link)

F. He, S.K. Ong, A.Y.C. Nee, Feb 2019, Information (MDPI), Vol. 10, No. 2, 60 (13 pages). https://doi.org/10.3390/info10020060

155. An approach for augmented learning of finite element analysis

J.M. Huang, S.K. Ong and A.Y.C. Nee, June 2019, Computers & Education, Vol. 27, No. 4, 921-933. https://doi.org/10.1002/cae.22125

156. A Practical Augmented Reality-Assisted Maintenance System Framework for Adaptive User Support

C.Y. Siew, S.K. Ong, A.Y.C. Nee, Oct 2019, Robotics and Computer-Integrated Manufacturing, Vol. 59, 115-129. https://doi.org/10.1016/j.rcim.2019.03.010

157. User-oriented Augmented Reality Content Delivery and Management for Ubiquitous Manufacturing

W.K. Li, S.K. Ong and A.Y.C. Nee, Oct 2019, Journal of Manufacturing Science and Engineering (ASME), Vol. 141, No. 10, 104502 (8 pages). https://doi.org/10.1115/1.4044331

158. Augmented Reality-assisted Robot Programming System for Industrial Applications

S.K. Ong, A.W.W. Yew, NK Thanigaivel, A.Y.C. Nee, Feb 2020, Robotics and Computer-Integrated Manufacturing, Vol. 61, Feb 2020, 101820. https://doi.org/10.1016/j.rcim.2019.101820

159. Enhancing Smart Shop Floor Management with Ubiquitous Augmented Reality

X. Wang, A.W.W. Yew, S.K. Ong and A.Y.C. Nee, 2020, International Journal of Production Research,  vol. 58, no. 8, 2352-2367. https://doi.org/10.1080/00207543.2019.1629667

160. AR-assisted Robot Welding Programming

S.K. Ong, A.Y.C. Nee, A.W.W. Yew, NK Thanigaivel, 2020, Advances in Manufacturing, vol. 8, pp. 40-48. https://doi.org/10.1007/s40436-019-00283-0

161. 3D Bare-Hand Interaction Enabling Ubiquitous Interaction with Smart Objects

X. Wang, S.K. Ong, A.Y.C. Nee, 2020, Advances in Manufacturing, vol. 8, 133-143. (Open Access, Download Link)

162. Interactive AR-assisted Product Disassembly Sequence Planning (ARDIS)

M.M.L. Chang, S.K. Ong, A.Y.C. Nee, 2020, International Journal of Production Research, vol. 58, no. 16, 4916-4931, DOI: 10.1080/00207543.2020.1730462

163. Human-oriented Maintenance and Disassembly in Sustainable Manufacturing 

C.Y. Siew, M.M.L. Chang, S.K. Ong, A.Y.C. Nee, 2020, Computers in Industrial Engineering, vol. 50, 106903, DOI:/10.1016/j.cie.2020.106903

164. Improving maintenance efficiency and safety through a human-centric approach

C.Y. Siew, S.K. Ong, A.Y.C. Nee, 2021, Advances in Manufacturing, Vol. 9, no. 1, pp 104-114, https://doi.org/10.1007/s40436-020-00334-x

165. Product disassembly sequence planning: state-of-the-art, challenges, opportunities and future directions

S.K. Ong, M.M.L. Chang, A.Y.C. Nee, 2021, International Journal of Production Research,  Vol. 59, No. 11, pp 3493-3508, https://doi.org/10.1080/00207543.2020.1868598

166. Image and model sequences matching for on-site assembly stage identification

J.Z. Pang, S.K. Ong, A.Y.C. Nee, December 2021, Robotics and Computer-Integrated Manufacturing, Vol. 72, pp 102185, https://doi.org/10.1016/j.rcim.2021.102185.

167. An Integrated Mobile Augmented Reality Digital Twin Monitoring System

F. He, S.K. Ong, A.Y.C. Nee, May 2021, Computers, Vol. 10, No. 8, https://doi.org/10.3390/computers10080099 (Open access)

168. State-of-the-art survey on digital twin implementations

Y.K. Liu, S.K. Ong, A.Y.C. Nee, Jan 2022, Advances in Manufacturing (Springer), Vol. 10, pp. 1-23, https://link.springer.com/article/10.1007/s40436-021-00375-w.

169. Adaptive human-robot collaboration for robotic grinding of complex workpieces

H.L. Xie, Q.H. Wang, S.K. Ong, J.R. Li, Z.P. Chi, 2022, Annals of CIRP, Vol. 1,  https://doi.org/10.1016/j.cirp.2022.04.015

170. A novel deep generative model based on imaginal thinking for automating design

L. Huang, Y.H. Yin, S.K. Ong, 2022, Annals of CIRP, Vol. 1, https://doi.org/10.1016/j.cirp.2022.04.053.

Local/Regional Journals Publications

1.     Design Interface: An Enhancement of a Feature Recogniser
S. K. Ong, A. Y. C. Nee, S. Prombanpong and Y. F. Zhang, 1993, Journal of Industrial Technology, Vol. 3, No. 2, 1 — 19.

2.     Set-up Planning in Manufacturing
S. K. Ong and A. Y. C. Nee, 1996, IES Journal of Manufacturing, Institute of Engineers, Singapore, Vol. 36, No. 4, 50 — 59.

3.     Fuzzy-set Based Set-up Planning
S. K. Ong and A. Y. C. Nee, 1994, VISION,  Vol. 10, No. 1, 6 — 8.


Updated March 2022