Journal Articles

  1. Formation of dual quasi-continuous networked structure and its strengthening effect in Ti-6Al-4V alloy reinforced with graphene via powder bed fusion
    Q. Yan, B. Chen, Z. Jia, J. Yang, J. Wan, S. Li, L. Jia, J. Shen, J. Li, W.F. Lu, H. Wang
    Additive Manufacturing 92 (2024) 104364
  2. Compressive mechanical response and microstructures in low strain rate plastic deformation of stainless steel 316L fabricated by selective laser melting
    Y. Yang, Y. Bai, Y. Wang, Y. Zhang, C. Weng, W.F. Lu, H. Wang
    Journal of Materials Research and Technology 29 (2024) 4327–4344
  3. New insights into the deformation mechanism of orientation-dependent nanoindentation behaviors
    Z. Zhang, Q. Yan, Y. Zhang, H. Wang, Z. Tong, X. Jiang
    Tribology International 200 (2024) 110112
  4. Influence of water on the machinability of calcium fluoride crystal
    J. Zhan, Y.J. Lee, S. Yang, H. Wang
    Journal of the European Ceramic Society 44 (2024) 116738
  5. Triple effects of the physicochemical interaction between water and copper and their influence on microcutting
    C. Zhang, Y.J. Lee, Y.F. Zhang, H. Wang
    ACS Applied Materials & Interfaces 16 (2024) 37167–37182
  6. Facile fabrication of hierarchical micro/nano aluminum alloy surfaces with enhanced hydrophobicity and surface quality by single point diamond cutting under a magnetic field influence
    W.S. Yip, T. He, H. Wang, S. To
    Journal of Materials Research and Technology 30 (2024) 7946–7957
  7. Ultrasonic machining response and improvement mechanism for differentiated bio-CoCrMo alloys manufactured by directed energy deposition
    H Lu, L Zhu, P Xue, B Yan, Y Hao, Z Yang, J Ning, C Shi, H Wang
    Journal of Materials Science & Technology 193 (2024) 226–243
  8. Natural-like generation of grain boundary models and the combined effects of microstructural elements and lithiation on the plastic behavior of TiO2: A computational study
    T Okamoto, S Anastassia, K Kameda, M Ohara, H Wang, S Manzhos
    Computational Materials Science 239 (2024) 112989
  9. Compressive mechanical response and microstructures in low strain rate plastic deformation of stainless steel 316L fabricated by selective laser melting
    Y Yang, Y Bai, Y Wang, Y Zhang, C Weng, WF Lu, H Wang
    Journal of Materials Research and Technology 29 (2024) 4327–4344
  10. Water-enhanced plasticity of calcium fluoride
    J Zhan, Y Guo, H Wang
    Journal of the European Ceramic Society 44 (2024) 1795–1805
  11. A novel fuzzy echo state broad learning system for surface roughness virtual metrology
    W Tian, J Zhang, F Zhao, Z Jiang, X Mei, G Che, H Wang
    IEEE Transactions on Industrial Informatics 20 (2024) 3756–3766
  12. Sustainability of methods for augmented ultra-precision machining
    YJ Lee, H Wang
    International Journal of Precision Engineering and Manufacturing-Green Technology 11 (2024) 585–624
  13. Mechanism in scratching of calcium fluoride with magneto-plasticity
    Y Guo, J Zhan, WF Lu, H Wang
    International Journal of Mechanical Sciences 263 (2024) 108768
  14. Abnormal mechanochemical effect in ultraprecision machining of an additively manufactured precipitation-strengthened high-entropy alloy
    L Xu, Y Bai, Y Guo, C Ren, X Tan, Y Jia, G Wang, H Wang
    Journal of Materials Science and Technology 170 (2024) 221–237
  15. Effect of heat treatment and electroless Ni-P coating on mechanical property and corrosion behaviour of 316L stainless steel fabricated by laser powder bed fusion
    C Zhao, Y Guo, Y Yang, Y Bai, B Li, WF Lu, K Zeng, H Wang
    Virtual and Physical Prototyping 19 (2024)
  16. Electro-plastic effect on the indentation of calcium fluoride
    J Zhan, Y Guo, H Wang
    International Journal of Mechanical Sciences 261 (2024) 108693
  17. Interpolation-based virtual sample generation for surface roughness prediction
    W Tian, J Zhang, F Zhao, X Feng, X Mei, G Chen, H Wang
    Journal of Intelligent Manufacturing 35 (2024) 343–353

    2023

  18. Efficient post-processing of additive manufactured maraging steel enhanced by the mechanochemical effect
    Y Bai, YJ Lee, Y Guo, Q Yan, C Zhao, AS Kumar, JM Xue, H Wang
    International Journal of Machine Tools and Manufacture 193 (2023) 104086
  19. Unique cellular microstructure-enabled hybrid additive and subtractive manufacturing of aluminium alloy mirror with high strength
    Y Bai, YJ Lee, C Zhao, Q Yan, Y Guo, Y Shang, H Wang
    Journal of Materials Processing Technology 320 (2023) 118095
  20. A generalized well neural network for surface defect segmentation in Optical Communication Devices via Template-Testing comparison
    T Niu, Z Xie, J Zhang, L Tang, B Li, H Wang
    Computers in Industry 151 (2023) 103978
  21. Simultaneously improving mechanical, thermal, and anti-wear properties of Ti alloys using 3D-networked graphene as reinforcement
    Q Yan, B Chen, W Ye, T Zhang, J Wan, Q Zhou, J Shen, J Li, WF Lu
    Carbon 213 (2023) 118152
  22. Support removal on thin-walled parts produced by laser powder bed fusion
    Q Cao, Y Bai, Z Zheng, J Zhang, JYH Fuh, H Wang
    3D Printing and Additive Manufacturing 10 (2023) 762–775
  23. Predictive modelling for enhanced scratching of brittle ceramics with magneto-plasticity
    Y Guo, J Zhan, YJ Lee, WF Lu, H Wang
    International Journal of Mechanical Sciences 249 (2023) 108272
  24. Feasibility and reliability of laser powder bed fused AlSi10Mg/wrought AA6061 hybrid aluminium alloy component
    C Zhao, Y Bai, H Wang
    International Journal of Precision Engineering and Manufacturing-Green Technology 10 (2023) 959–977
  25. Anisotropic cutting mechanisms on the surface quality in ultra-precision machining of R-plane sapphire
    Y Wang, Z Liang, W Zhao, X Wang, H Wang
    Applied Surface Science 622 (2023) 156868
  26. Mediating compositional machining difference of UD-CFRP in orthogonal cutting by epoxy coating
    L Han, J Zhang, H Wang
    Composites Part B: Engineering 258 (2023) 110706
  27. Fine finishing of internal surfaces using cassava starch medium
    X Dong, Q Cao, Z Gu, T Zhu, C Lu, M Jin, H Wang
    Journal of Materials Processing Technology 315 (2023) 117918
  28. Material removal rate prediction based on broad echo state learning system for magnetically driven internal finishing
    J Zhang, W Tian, F Zhao, X Mei, G Chen, H Wang
    IEEE Transactions on Industrial Informatics 19 (2023) 6295–6304
  29. Non-invasive improvement of machining by reversible electrochemical doping: A proof of principle with computational modeling on the example of lithiation of TiO2
    A Sorkin, Y Guo, M Ihara, S Manzhos, H Wang
    Materials Chemistry and Physics 295 (2023) 127183
  30. Investigation of the temperature effect on cutting of calcium fluoride single crystal using molecular dynamics simulation
    J Zhan, YJ Lee, G Xu, H Wang
    Procedia CIRP 117 (2023) 438–443

    2022

  31. Pivotal role of reversible NiO6 geometric conversion in oxygen evolution
    X Wang, S Xi, P Huang, Y Du, H Zhong, Q Wang, A Borgna, YW Zhang, Z Wang, H Wang, ZG Yu, WSV Lee, J Xue
    Nature 611 (2022) 702-708
  32. 3D-printed functionally-graded lattice structure with tunable removal characteristics for precision polishing
    J Zhang, R Hong, H Wang
    Additive Manufacturing 59 (2022) 103152
  33. Magneto-plasticity in micro-cutting of single-crystal copper
    Y Guo, YJ Lee, Y Zhang, H Wang
    Journal of Materials Science & Technology 124 (2022) 121–134
  34. Quasi in-situ analysis of compressive creep behaviors and microstructure evolutions in Al–Zr alloys with Sc and Er additions
    J Zhang, Z Chen, H Wang
    Materials Science and Engineering: A 852 (2022) 143650
  35. High-order joint-smooth trajectory planning method considering tool-orientation constraints and singularity avoidance for robot surface machining
    L Lu, L Zhang, C Fan, H Wang
    Journal of Manufacturing Processes 80 (2022) 789–804
  36. Joint-smooth toolpath planning by optimized differential vector for robot surface machining considering the tool orientation constraints
    L Lu, J Han, F Dong, Z Ding, C Fan, S Che, H Liu, H Wang
    IEEE/ASME Transactions on Mechatronics 27 (2021) 2301–2311
  37. Hierarchically porous interlayer for highly permeable and fouling-resistant ceramic membranes in water treatment
    Z Zhang, Q Gu, TCA Ng, J Zhang, X Zhang, L Zhang, X Zhang, H Wang, HY Ng, J Wang
    Separation and Purification Technology 294 (2022) 121092
  38. Prediction of surface roughness using fuzzy broad learning system based on feature selection
    W Tian, F Zhao, Z Sun, J Zhang, C Gong, X Mei, G Chen, H Wang
    Journal of Manufacturing Systems 64 (2022) 508–517
  39. Extraordinary antiwear properties of graphene-reinforced Ti composites induced by interfacial decoration
    Q Yan, B Chen, W Ye, J Wan, T Zhang, H Kou, Q Zhou, W Lu, H Wang, J Shen, H Wang, J Li
    ACS Applied Materials & Interfaces 14 (2022) 27118–27129
  40. Effect of a weak magnetic field on ductile-brittle transition in micro-cutting of single-crystal calcium fluoride
    Y Guo, YJ Lee, Y Zhang, A Sorkin, S Manzhos, H Wang
    Journal of Materials Science & Technology 112 (2022) 96–113
  41. Analysis of the warpage phenomenon of micro-sized parts with precision injection molding by experiment, numerical simulation, and grey theory
    WC Lin, FY Fan, CF Huang, YK Shen, H Wang
    Polymers 14 (2022) 1845
  42. Abnormal thermal expansion behaviour and phase transition of laser powder bed fusion maraging steel with different thermal histories during continuous heating
    Y Bai, C Zhao, J Zhang, H Wang
    Additive Manufacturing 53 (2022) 102712
  43. Development of morphable polishing tools with labyrinth and dimple textures
    Q Nie, J Zhang, R Hong, JM Xue, H Wang
    Journal of Materials Processing Technology 303 (2022) 117539
  44. Isotropic etching polishing of belt ground Inconel 718 to improve surface strengthening and quality
    X Huang, Z Chai, F Cao, X Ren, H Chen, H Wang, WF Lu, X Chen
    Surface and Coatings Technology 436 (2022) 128292
  45. Magnetically driven internal finishing of AISI 316L stainless steel tubes generated by laser powder bed fusion
    J Zhang, H Wang
    Journal of Manufacturing Processes 76 (2022) 155–166
  46. Microstructural modulation of TiAl alloys for controlling ultra-precision machinability
    Y Zhang, YJ Lee, S Chang, Y Chen, Y Bai, J Zhang, H Wang
    International Journal of Machine Tools and Manufacture 174 (2022) 103851
  47. Microstructure and anisotropic mechanical properties of selective laser melted Ti6Al4V alloy under different scanning strategies
    Z Zheng, X Jin, Y Bai, Y Yang, C Ni, WF Lu, H Wang
    Materials Science and Engineering: A 831 (2022) 142236
  48. Evolution mechanism of surface morphology and internal hole defect of 18Ni300 maraging steel fabricated by selective laser melting
    Y Bai, C Zhao, D Wang, H Wang
    Journal of Materials Processing Technology 299 (2022) 117328

    2021

  49. Low-temperature superplasticity of β-stabilized Ti-43Al-9V-Y alloy sheet with bimodal γ-grain-size distribution
    Y Zhang, S Chang, Y Chen, Y Bai, C Zhao, X Wang, JM Xue, H Wang
    Journal of Materials Science & Technology 95 (2021) 225–236
  50. Generic model of time-variant tool influence function and dwell-time algorithm for deterministic polishing
    J Zhang, H Wang
    International Journal of Mechanical Sciences 211 (2021) 106795
  51. Microstructure evaluation of shear bands of microcutting chips in AA6061 alloy under the mechanochemical effect
    J Zhang, YJ Lee, H Wang
    Journal of Materials Science & Technology 91 (2021) 178–186
  52. Influence of scanning strategy and building direction on microstructure and corrosion behaviour of selective laser melted 316L stainless steel
    C Zhao, Y Bai, Y Zhang, X Wang, JM Xue, H Wang
    Materials & Design 209 (2021) 109999
  53. Characterizing crack morphology toward improving ductile mode cutting of calcium fluoride
    YJ Lee, H Wang
    Ceramics International 47 (2021) 28543–28556
  54. Beneficial stress of a coating on ductile-mode cutting of single-crystal brittle material
    YJ Lee, A Senthil Kumar, H Wang
    International Journal of Machine Tools and Manufacture 168 (2021) 103787
  55. Fabrication and Tribological Properties of Self-Assembled Monolayers of Alkanethiols on Nickel Substrates
    J Yang, M Zhou, J Liu, H Wang, C Weng
    Applied Surface Science 559 (2021) 149963
  56. Additively manufactured CuCrZr alloy: Microstructure, mechanical properties and machinability
    Y Bai, C Zhao, Y Zhang, J Chen, H Wang
    Materials Science and Engineering: A 819 (2021) 141528
  57. Stiffness modeling of an industrial robot with a gravity compensator considering link weights
    P Xu, X Yao, S Liu, H Wang, K Liu, AS Kumar, WF Lu, G Bi
    Mechanism and Machine Theory 161 (2021) 104331
  58. Surface texture transformation in micro-cutting of AA6061-T6 with the rehbinder effect
    J Zhang, YJ Lee, H Wang
    International Journal of Precision Engineering and Manufacturing-Green Technology 8 (2021) 1151–1162
  59. A review of post-processing technologies in additive manufacturing
    X Peng, L Kong, JYH Fuh, H Wang
    Journal of Manufacturing and Materials Processing 5 (2021) 38
  60. Effect of cutting speed on surface integrity and chip formation in micro-cutting of Zr-based bulk metallic glass
    SY Chau, S To, H Wang, WS Yip, KC Chan, CF Cheung
    The International Journal of Advanced Manufacturing Technology 114 (2021) 3301–3310
  61. Ultra-precision micro-cutting of maraging steel 3J33C under the influence of a surface-active medium
    Z Zheng, YJ Lee, J Zhang, X Jin, H Wang
    Journal of Materials Processing Technology 292 (2021) 117054
  62. Mechanochemical effect on the microstructure and mechanical properties in ultraprecision machining of AA6061 alloy
    J Zhang, YJ Lee, H Wang
    Journal of Materials Science & Technology 69 (2021) 228–238
  63. A novel method to improve the removability of cone support structures in selective laser melting of 316L stainless steel
    Q Cao, Z Shi, Y Bai, J Zhang, C Zhao, JYH Fuh, H Wang
    Journal of Alloys and Compounds 854 (2021) 157133
  64. Additive manufacturing of stable energy storage devices using a multinozzle printing system
    F Meng, M Zhang, J Huang, WF Lu, JM Xue, H Wang
    Advanced Functional Materials 31 (2021) 2008280
  65. Microstructure and machinability of selective laser melted high-strength maraging steel with heat treatment
    Y Bai, C Zhao, J Yang, R Hong, C Weng, H Wang
    Journal of Materials Processing Technology     288 (2021) 116906
  66. Microstructure and mechanical properties of additively manufactured multi-material component with maraging steel on CrMn steel
    Y Bai, C Zhao, Y Zhang, H Wang
    Materials Science and Engineering: A 802 (2021) 140630
  67. Tool path optimization for robotic surface machining by using sampling-based motion planning algorithms
    L Lu, J Zhang, X Tian, J Han, H Wang
    Journal of Manufacturing Science and Engineering 143 (2021) 011002

    2020

  68. Effect of material anisotropy on ultra-precision machining of Ti-6Al-4V alloy fabricated by selective laser melting
    C Ni, L Zhu, Z Zheng, J Zhang, Y Yang, J Yang, Y Bai, C Weng, WF Lu, H Wang
    Journal of Alloys and Compounds 848 (2020) 156457
  69. Materializing efficient methanol oxidation via electron delocalization in nickel hydroxide nanoribbon
    X Wang, S Xi, WSV Lee, P Huang, P Cui, L Zhao, W Hao, X Zhao, Z Wang, H Wu, H Wang, C Diao, A Borgna, Y Du, ZG Yu, S Pennycook, J Xue
    Nature Communications 11 (2020) 4647
  70. Densification behavior and influence of building direction on high anisotropy in selective laser melting of high-strength 18Ni-Co-Mo-Ti maraging steel
    Y Bai, YJ Lee, C Li, H Wang
    Metallurgical and Materials Transactions A 51 (2020) 5861–5879
  71. Understanding the damage evolution of sapphire under scratching from AE signals
    X Gu, Q Zhao, J Zhang, B Guo, H Wang
    Ceramics International 46 (2020) 26085–26099
  72. Design of FG/CS-LPP and material removal uniformity experiment on ZrO2 ceramic
    X Dong, C Lu, M Jin, D Zhu, L Wang, H Wang
    Composites Part A: Applied Science and Manufacturing 138 (2020) 106048
  73. Enhancing ductile-mode cutting of calcium fluoride single crystals with solidified coating
    YJ Lee, JY Chong, A Chaudhari, H Wang
    International Journal of Precision Engineering and Manufacturing-Green Technology 7 (2020) 1019–1029
  74. Investigation of interface thermal resistance between polymer and mold insert in micro-injection molding by non-equilibrium molecular dynamics
    C Weng, J Li, J Lai, J Liu, H Wang
    Polymers 12 (2020) 2409
  75. Time-optimal tool motion planning with tool-tip kinematic constraints for robotic machining of sculptured surfaces
    L Lu, J Zhang, JYH Fuh, J Han, H Wang
    Robotics and Computer-Integrated Manufacturing 65 (2020) 101969
  76. The effect of support structures on maraging steel MS1 parts fabricated by selective laser melting at different building angles
    Q Cao, J Zhang, S Chang, JYH Fuh, H Wang
    Rapid Prototyping Journal 26 (2020) 1465–1476
  77. Suppression of polycrystalline diamond tool wear with mechanochemical effects in micromachining of ferrous metal
    YJ Lee, YK Shen, H Wang
    Journal of Manufacturing and Materials Processing 4 (2020) 81
  78. Dual interfacial characterization and property in multi-material selective laser melting of 316L stainless steel and C52400 copper alloy
    Y Bai, J Zhang, C Zhao, C Li, H Wang
    Materials Characterization 167 (2020) 110489
  79. Effects of machining surface and laser beam scanning strategy on machinability of selective laser melted Ti6Al4V alloy in milling
    C Ni, L Zhu, Z Zheng, J Zhang, Y Yang, R Hong, Y Bai, WF Lu, H Wang
    Materials & Design 194 (2020) 108880
  80. Transmission electron microscopy (TEM) study of anisotropic surface damages in micro-cutting polycrystalline aluminate magnesium spinel (PAMS) crystals
    Z Shi, J Zhang, Q Zhao, B Guo, H Wang
    Ceramics International 46 (2020) 20570–20575
  81. A review on processing polycrystalline magnesium aluminate spinel (MgAl2O4): Sintering techniques, material properties and machinability
    Z Shi, Q Zhao, B Guo, T Ji, H Wang
    Materials & Design 193 (2020) 108858
  82. Dry mechanical-electrochemical polishing of selective laser melted 316L stainless steel
    Y Bai, C Zhao, J Yang, JYH Fuh, WF Lu, C Weng, H Wang
    Materials & Design 193 (2020) 108840
  83. Effect of ultrasonic elliptical vibration assistance on the surface layer defect of M-plane sapphire in microcutting
    Y Wang, Z Liang, W Zhao, X Wang, H Wang
    Materials & Design 192 (2020) 108755
  84. Current understanding of surface effects in microcutting
    YJ Lee, H Wang
    Materials & Design 192 (2020) 108688
  85. Formation mechanism of residual stresses in micro-injection molding of PMMA: a molecular dynamics simulation
    C Weng, T Ding, M Zhou, J Liu, H Wang
    Polymers 12 (2020) 1368
  86. Removability of 316L stainless steel cone and block support structures fabricated by Selective Laser Melting (SLM)
    Q Cao, Y Bai, J Zhang, Z Shi, JYH Fuh, H Wang
    Materials & Design 191 (2020) 108691
  87. Experimental and theoretical study of internal finishing by a novel magnetically driven polishing tool
    J Zhang, H Wang, AS Kumar, M Jin
    International Journal of Machine Tools and Manufacture 153 (2020) 103552
  88. Optical surface generation on additively manufactured AlSiMg0.75 alloys with ultrasonic vibration-assisted machining
    Y Bai, Z Shi, YJ Lee, H Wang
    Journal of Materials Processing Technology 280 (2020) 116597
  89. Damage mechanisms of polycrystalline aluminate magnesium spinel (PAMS) under different loading conditions of indentation and micro-cutting tests
    Z Shi, H Wang, Q Zhao, T Ji, Y Wang, Y Pan, B Guo
    Ceramics International 46 (2020) 7235–7252
  90. Geometrically necessary dislocations distribution in face-centred cubic alloy with varied grain size
    J Zhang, B Wang, H Wang
    Materials Characterization 162 (2020) 110205
  91. Investigation on the microstructure and machinability of ASTM A131 steel manufactured by directed energy deposition
    Y Bai, A Chaudhari, H Wang
    Journal of Materials Processing Technology 276 (2020) 116410
  92. Experimental and Numerical Study Determining the Warpage Phenomenon of Thin-Wall Injection Molding
    YT Huang, CF Huang, BY PEng, CW Chang, HC Cheng, Y Lin, YK Shen, H Wang
    Advances in Polymer Technology 2020 (2020)
  93. Improvement in compressive creep resistance of Al-0.2 Zr alloy with L12 structured Sc-enriched precipitates
    J Zhang, B Wang, H Wang, C Zhang
    Materials Characterization 159 (2020) 110024

    2019

  94. Fundamental study on damage-free machining of sapphire: Revealing damage mechanisms via combining elastic stress fields and crystallographic structure
    X Gu, Q Zhao, H Wang, J Xue, B Guo
    Ceramics International 45 (2019) 20684–20696
  95. Micromachining of ferrous metal with an ion implanted diamond cutting tool
    YJ Lee, L Hao, J Lüder, A Chaudhari, S Wang, S Manzhos, H Wang
    Carbon 152 (2019) 598–608
  96. Molecular dynamics simulation on the influences of nanostructure shape, interfacial adhesion energy, and mold insert material on the demolding process of micro-injection molding
    J Yang, C Weng, J Lai, T Ding, H Wang
    Polymers 11 (2019) 1573
  97. Surface quality and material removal in magnetic abrasive finishing of selective laser melted 316L stainless steel
    J Zhang, A Chaudhari, H Wang
    Journal of Manufacturing Processes 45 (2019) 710–719
  98. On the effect of grain structure in micro-cutting of polycrystalline aluminate magnesium spinel (PAMS) crystals
    Z Shi, Q Zhao, H Wang, J Chen, T Jin, T Ji
    International Journal of Mechanical Sciences 160 (2019) 372–385
  99. Effect of surface-active media on chip formation in micromachining
    A Chaudhari, H Wang
    Journal of Materials Processing Technology 271 (2019) 325–335
  100. High-temperature nanoindentation size effect in fluorite material
    J Chua, R Zhang, A Chaudhari, SJ Vachhani, AS Kumar, Q Tu, H Wang
    International Journal of Mechanical Sciences 159 (2019) 459–466
  101. Enhancing water harvesting through cascading effect
    BTW Ang, J Zhang, GJ Lin, H Wang, WSV Lee, JM Xue
    ACS Applied Materials and Interfaces 11 (2019) 27464–27469
  102. Effect of heat treatment on the microstructure and mechanical properties of maraging steel by selective laser melting
    Y Bai, D Wang, Y Yang, H Wang
    Materials Science and Engineering: A 760 (2019) 105–117

    2018

  103. Vibration-assisted conformal polishing of additively manufactured structured surface
    J Zhang, AYX Toh, H Wang, WF Lu, JYH Fu
    Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 233 (2018) 4154–4164
  104. Effect of cutting tool geometries on the ductile-brittle transition of monocrystalline sapphire
    X Gu, H Wang, Q Zhao, J Xue, B Guo
    International Journal of Mechanical Sciences 148 (2018) 565–577
  105. A novel magnetically driven polishing technique for internal surface finishing
    J Zhang, J Hu, H Wang, AS Kumar, A Chaudhari
    Precision Engineering 54 (2018), 222–232
  106. Rehbinder effect in ultraprecision machining of ductile materials
    A Chaudhari, ZY Soh, H Wang, AS Kumar
    International Journal of Machine Tools and Manufacture 133 (2018) 47–60
  107. Surface quality characterisation of diamond cut V-groove structures made of rapidly solidified aluminium RSA-905
    J Guo, J Zhang, H Wang, K Liu, AS Kumar
    Precision Engineering 53 (2018) 120–133
  108. A review on ductile mode cutting of brittle materials
    EK Antwi, K Liu, H Wang
    Frontiers of Mechanical Engineering 13 (2018) 251–263
  109. On the theoretical foundation for the microcutting of calcium fluoride single crystals at elevated temperatures
    H Wang, AS Kumar, O Riemer
    Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 232 (2018) 1123–1129
  110. Investigation on surface integrity of rapidly solidified aluminum RSA 905 by magnetic field-assisted finishing
    J Guo, H Wang, MH Goh, K Liu
    Micromachines 9 (2018) 146

    2017

  111. Novel design and characterisation of surface modification in wire electrical discharge machining using assisting electrodes
    C Kuo, H Kao, H Wang
    Journal of Materials Processing Technology 244 (2017) 136–149

    2016

  112. On the mechanism of asymmetric ductile-brittle transition in microcutting of (111) CaF2 single crystals
    H Wang, O Riemer, K Rickens, E Brinksmeier
    Scripta Materialia 114 (2016) 21–26

    Before NUS

  113. A study of the fabrication of v-groove structure in ultra-precision milling
    S Wang, S To, X Chen, H Wang, H Xia
    International Journal of Computer Integrated Manufacturing 27 (2014) 986–996
  114. Mesoplasticity approach to studies of the cutting mechanism in ultra-precision milling
    WBR Lee, H Wang, S To, CF Cheung, CY Chan
    Chinese Journal of Mechanical Engineering 27 (2014) 219–228
  115. Finite element modelling of shear angle and cutting force variation induced by material anisotropy in ultra-precision diamond turning
    WB Lee, H Wang, CY Chan, S To
    International Journal of Machine Tools and Manufacture 75 (2013) 82–86
  116. Enhancement of the machinability of silicon by hydrogen ion implantation for ultra-precision micro-cutting
    S To, H Wang, EV Jelenković
    International Journal of Machine Tools and Manufacture 74 (2013) 50–55
  117. Enhancement of surface finish using water-miscible nano-cutting fluid in ultra-precision turning
    CY Chan, WB Lee, H Wang
    International Journal of Machine Tools and Manufacture 73 (2013) 62–70
  118. Investigation on the influence of tool-tip vibration on surface roughness and its representative measurement in ultra-precision diamond turning
    H Wang, S To, CY Chan
    International Journal of Machine Tools and Manufacture 69 (2013) 20–29
  119. Electropulsing-induced phase transformations and their effects on the single point diamond turning of a tempered alloy AZ91
    D Zhang, S To, YH Zhu, H Wang, GY Tang
    International Journal of Materials Research 103 (2012) 1205–1209
  120. Static electropulsing-induced microstructural changes and their effect on the ultra-precision machining of cold-rolled AZ91 alloy
    D Zhang, S To, YH Zhu, H Wang GY Tang
    Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science 43 (2012) 1341–1346
  121. Applications of ultra-precision free-form machining technology to advanced optics
    WB Lee, H Wang, S To, CF Cheung
    Materials Science Forum 697–698 (2012) 834–837
  122. Dynamic modelling of shear band formation and tool-tip vibration in ultra-precision diamond turning
    H Wang, S To, CY Chan, CF Cheung, WB Lee
    International Journal of Machine Tools and Manufacture 51 (2011) 512–519
  123. A study on tool wear in ultra-precision diamond turning with finite element modelling
    H Wang, S To
    International Journal of Nanomanufacturing 7 (2011) 500–516
  124. A study of regularly spaced shear bands and morphology of serrated chip formation in microcutting process
    H Wang, S to, CY Chan, CF Cheung, WB Lee
    Scripta Materialia 63 (2010) 227–230
  125. A theoretical and experimental investigation of the tool-tip vibration and its influence upon surface generation in single-point diamond turning
    H Wang, S To, CY Chan, CF Cheung, WB Lee
    International Journal of Machine Tools and Manufacture 50 (2010) 241–252
  126. Elastic strain induced shear bands in the microcutting process
    H Wang, S To, CY Chan, CF Cheung, WB Lee
    International Journal of Machine Tools and Manufacture 50 (2010) 9–18
  127. Finite element modelling of micro-cutting processes from crystal plasticity
    YP Chen, WB Lee, S To, H Wang
    International Journal of Modern Physics B 22 (2008) 5943–5948
  128. Quality design of fixture planning for sheet metal assembly
    B Li, H Tang, X Yang, H Wang
    International Journal of Advanced Manufacturing Technology 32 (2007) 690–697
  129. Analysis and simulation for a parallel drill point grinder:Part I: Kinematics, workspace and singularity analysis
    B Li, Y Hu, H Wang
    International Journal of Advanced Manufacturing Technology 31 (2007) 915–925
  130. Analysis and simulation for a parallel drill point grinder – Part 2: Grinding kinematic modeling and simulation
    B Li, X Hu, H Wang
    International Journal of Advanced Manufacturing Technology 30 (2007) 221–226