Completed MEng Thesis Supervision

Professor AYC Nee — Theses Supervised:

M.Eng. Theses

  1. Bhattacharya, Nilanjan

Title A knowledge-based computer aided design of jigs and fixtures
Imprint 1986
Note Thesis (M.Eng.)–Dept. of Mechanical and Production Engineering, Faculty of Engineering, National University of Singapore, 1987.

2. Puah, Kok-yong

Title Development of a computerised machinability data base system
Imprint 1986
Note Thesis (M.Eng.)–Dept. of Mechanical and Production Engineering, Faculty of Engineering, National University of Singapore, 1987.

3. Bok, Shung Hwee

Title MICAPP : a prolog-based expert process planning system
Imprint 1986
Note Academic exercise–Dept. of Mechanical and Production Engineering, Faculty of Engineering, National University of Singapore, 1987.

4.  Long, Shyh Lai

Title Design and development of an operations planning package for a low cost computer system
Imprint 1988
Note Thesis (M.Eng.)–Dept. of Mechanical and Production Engineering, Faculty of Engineering, National University of Singapore, 1989.

5.  Seow, Kiat Wang

Title Computer aided nesting of dissimilar parts with boundary constraints
Imprint 1988
Note Thesis (M.Eng.)–Dept. of Mechanical and Production Engineering, Faculty of Engineering, National University of Singapore, 1989.

6. Wee, Eric Hian Teck

Title Off-line adaptive optimization of CNC lathe turning operations
Imprint 1989
Note Thesis (M.Eng.)–Dept. of Industrial and Systems Engineering, Faculty of Engineering, National University of Singapore, 1990.

7. Tay, Eng Hock

Title Technical and economic studies of flexible manufacturing systems
Imprint 1990
Note Thesis (M.Eng.)–Dept. of Mechanical and Production Engineering, Faculty of Engineering, National University of Singapore, 1992.

8.  Tung, Kuo Hua

Title A modular fixture configuration design system using a rule/object based expert system approach
Imprint 1990
Note Thesis (M.Eng.)–Dept. of Mechanical and Production Engineering, Faculty of Engineering, National University of Singapore, 1992.

9.  Oh, Joo Tien

Title Mechanical properties of ballized holes
Imprint 1992
Note Thesis (M.Eng.)–Dept. of Mechanical and Production Engineering, Faculty of Engineering, National University of Singapore, 1994.

10.  Wen, Xiaomin

Title An integrated expert system for the selection and optimization of grinding parameters
Imprint 1992
Note Thesis (M.Eng.)–Dept. of Mechanical and Production Engineering, Faculty of Engineering, National University of Singapore, 1993.

11.  Choong, Ngai Fong

Title Development of an intelligent PC-based system for CNC nibbling
Imprint 1993
Note Thesis (M. Eng.)–Dept. of Mechanical and Production Engineering, Faculty of Engineering, National University of Singapore, 1994.

  1. Name Khaw, Hong Cher

Title An integrated CAD tool based on design intent
Imprint 1994
Note Thesis (M.Eng.)–Dept. of Mechanical and Production Engineering, Faculty of Engineering, National University of Singapore, 1995.

11.  See Toh, Kok Hwee

Title A PC-based CAD/CAM system for sheet metal bending
Imprint 1996
Note Thesis (M. Eng.)– Dept. of Mechanical and Production Engineering, Faculty of Engineering, National University of Singapore, 1996.

12.  Cheng, Wei

Title Intelligent process planning for rapid prototyping
Imprint 1996
Note Thesis (M.Eng.)–Dept. of Mechanical and Production Engineering, Faculty of Engineering, National University of Singapore, 1997.

13.  Dai, Jianren

Title Computer-aided modular fixture design and assembly
Imprint 1997
Note Thesis (M.Eng.)–Dept. of Mechanical and Production Engineering, Faculty of Engineering, National University of Singapore, 1997.

14.  Lin, Li

Title An integrated setup planning and fixture design system for prismatic parts
Imprint 1996
Note Thesis (M.Eng.)–Dept. of Mechanical and Production Engineering, Faculty of Engineering, National University of Singapore, 1997.

15.  Liu, Yadong

Title A neuro-fuzzy expert system to support product manufacturability evaluation
Imprint 1996
Note Thesis (M.Eng.)–Dept. of Mechanical and Production Engineering, Faculty of Engineering, National University of Singapore, 1997.

16.  Chen, Jiang

Title Setup planning using hopfield neural network and simulated annealing
Imprint 1997
Note Thesis(M.Eng.)–Dept. of Mechanical and Production Engineering, Faculty of Engineering, National University of Singapore, 1998.

17.  Zhang, Fu

Title Genetic algorithm in computer-aided process planning
Imprint 1997
Note Thesis (M.Eng.)–Dept. of Mechanical and Production Engineering, Faculty of Engineering, National University of Singapore, 1998.

18.  Foong, Kah Yue

Title A system to automate design of progressive dies for 2D metal stampings
Imprint 1999
Note Thesis (M.Eng.)–Dept. of Mechanical and Production Engineering, Faculty of Engineering, National University of Singapore, 1999.

19.  Kannappan, Iynkaran

Title Implementation of a machining simulation system on an intelligent controller for CNC machine tools
Imprint 1999
Note Thesis (M.Eng.)–Dept. of Mechanical and Production Engineering, Faculty of Engineering, National University of Singapore, 1999.

20.  Qiang, Lan

Title Cooperative and distributive design
Imprint 1999
Note Thesis (M.Eng.)–Dept. of Mechanical and Production Engineering, Faculty of Engineering, National University of Singapore, 1999.

21.  Wu, Shao Hong

Title Integration of process planning and scheduling in distributed virtual manufacturing
Imprint 1999
Note Thesis (M.Eng.)–Dept. of Mechanical and Production Engineering, Faculty of Engineering, National University of Singapore, 1999.

22.  Zaw, Hlwan Moe

Title Development of new EDM material using sintering technique
Imprint 1999
Note Thesis (M.Eng.)–Dept. of Mechanical and Production Engineering, Faculty of Engineering, National University of Singapore, 1999.

23.  Sun, Jiong

Title Agent-based product design and planning for distributed concurrent engineering
Imprint 1999
Note Thesis (M.Eng.)–Dept. of Mechanical and Production Engineering, Faculty of Engineering, National University of Singapore, 1999.

24.  Koh, Teck Hong

Title Development of pre-life cycle assessment (PRE-LCA) system
Imprint 1999
Note Thesis (M.Eng.)–Dept. of Mechanical and Production Engineering, Faculty of Engineering, National University of Singapore, 1999.

25.  Senthilkumar, Sundaresan

Title Dynamic fixture design for changes in sequencing
Imprint 1999
Note Thesis (M.Eng.)–Dept. of Mechanical and Production Engineering, Faculty of Engineering, National University of Singapore, 1999.

26.  An, Lijun

Title Design with customer for mass customization
Imprint 1999
Note Thesis (M.Eng.)–Dept. of Mechanical and Production Engineering, Faculty of Engineering, National University of Singapore, 1999.

27.  Li, Zengzhi

Title An advisor system for preliminary mold design
Imprint 2000
Note Thesis (M.Eng.)–Dept. of Mechanical Engineering, Faculty of Engineering, National University of Singapore, 2000.

28.  Ding, Jian

Title A computer-aided setup planning system in a dynamic workshop environment
Imprint 2000
Note Thesis (M.Eng.)–Dept. of Mechanical Engineering, Faculty of Engineering, National University of Singapore, 2000.

29.  Sim, Vee Ming

Title The development of virtual laboratories
Imprint 2000
Note Thesis (M.Eng.)–Dept. of Mechanical Engineering, Faculty of Engineering, National University of Singapore, 2000.

30.  Sun, Mingju

Title Fuzzy set-based manufacturability evaluation for rotational parts
Imprint 2000
Note Thesis (M.Eng.)–Dept. of Mechanical Engineering, Faculty of Engineering, National University of Singapore, 2000.

31.  Tan, Hsiao Yuz

Title An intelligent web-based feature recognizer for semi-prismatic workpieces
Imprint 2000
Note Thesis (M.Eng.)–Dept. of Mechanical Engineering, Faculty of Engineering, National University of Singapore, 2000.

32.  Jiang, Le

Title Internet-based virtual CNC milling system
Imprint 2000
Note Thesis (M.Eng.)–Dept. of Mechanical Engineering, Faculty of Engineering, National University of Singapore, 2000.

33.  Yao, Jun

Title A multi-agent system for concurrent design and process planning
Imprint 2000
Note Thesis (M.Eng.)–Dept. of Mechanical Engineering, Faculty of Engineering, National University of Singapore, 2000.

34.  An, Na

Title Web-based fault diagnostic and learning system
Imprint 2000
Note Thesis (M.Eng.)–Dept. of Mechanical Engineering, Faculty of Engineering, National University of Singapore, 2000.

35.  Chen, Tao

Title A web-based virtual environment for assembly planning
Imprint 2001
Note Thesis (M.Eng.)–Dept. of Mechanical Engineering, Faculty of Engineering, National University of Singapore, 2001.

36.  Jia, Hongzhong

Title Internet-based multi-functional scheduling for distributed manufacturing systems
Imprint 2002
Note Thesis (M.Eng.)–Dept. of Mechanical Engineering, Faculty of Engineering, National University of Singapore, 2002.

37.  Guo, Yugang

Title Function-based design modification of progressive dies
Imprint 2002
Note Thesis (M.Eng.)–Dept. of Mechanical Engineering, Faculty of Engineering, National University of Singapore, 2002.

38.  Thiruvenkadam, Girish

Title A Web-based Modular Fixture Element Resource Management System
Imprint 2002
Note Thesis (M.Eng.)–Dept. of Mechanical Engineering, Faculty of Engineering, National University of Singapore, 2002.

39.  Ratnapu, Kiran Kumar

Title Web-based fixture design
Imprint 2002
Note Thesis (M.Eng.)–Dept. of Mechanical Engineering, Faculty of Engineering, National University of Singapore, 2002.

40.  Jiang, Yufang

Title A Hybrid Case-Based Cost Estimation System for Gearing Products
Imprint 2002
Note Thesis (M.Eng.)–Dept. of Mechanical Engineering, Faculty of Engineering, National University of Singapore, 2002.

41.  Li, Junyong

Title A Feature-based Planning System for Bending Operations in Progressive Die Design
Imprint 2002
Note Thesis (M.Eng.)–Dept. of Mechanical Engineering, Faculty of Engineering, National University of Singapore, 2002.

42.  Leow, Lea Fang

Title Application of Shape Skeleton to Progressive Die Design
Imprint 2002
Note Thesis (M.Eng.)–Dept. of Mechanical Engineering, Faculty of Engineering, National University of Singapore, 2002.

43.  Li, Lin

Title Agent-based Computer-aided Process Planning for Distributed Manufacturing Systems
Imprint 2002
Note Thesis (M.Eng.)–Dept. of Mechanical Engineering, Faculty of Engineering, National University of Singapore, 2002.

44.  Wang, Jiao

Title Integrating process planning and scheduling by exploring the flexibility of process planning
Imprint 2004
Note Thesis (M.Eng.)–Dept. of Mechanical Engineering, Faculty of Engineering, National University of Singapore, 2004.

45.  Poh, Yang Liang

Title Augmented reality for facilitating design processes: An application to layout design
Imprint 2006
Note Thesis (SM)–Singapore-MIT Alliance (IMST) and Dept. of Mechanical Engineering, Faculty of Engineering, National University of Singapore, 2006.